Main public logs

Combined display of all available logs of Sharpfin. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 16:18, 8 June 2025 Philipp talk contribs created page Sleep timer (Created page with "When I first base patched my LOGIK IR100's there were values in the config files for the sleep timer. After upgrading to the v 257-a-421-a-057 service pack, the original unlimited sleep timer is now limited to three hours, and I can find no reference to it in the config file. Any help to increase the sleep timer would be appreciated.")
• 16:18, 8 June 2025 Philipp talk contribs deleted page Sleep timer.txt (content was: "When I first base patched my LOGIK IR100's there were values in the config files for the sleep timer. After upgrading to the v 257-a-421-a-057 service pack, the original unlimited sleep timer is now limited to three hours, and I can find no reference to it in the config file. Any help to increase the sleep timer would be appreciated.", and the only contributor was "Philipp" (talk))
• 15:45, 8 June 2025 Philipp talk contribs created page Config Options List (Created page with "= Config options for different firmware versions = Some of these are already documented on: Config.txt_File Once you know the purpose and can document usage, please update: Config.txt_File FW v257-a-421-a-091 - Feb 2008 FW v257-a-421-a-057 - Jan 2008")
• 15:38, 8 June 2025 Philipp talk contribs created page Vistron MX-200i (Created page with "Introduction ---- This radio first appeared in 2008 and was sold by eBuyer UK. References ---- http://logikir100.tripod.com/Vistron.htm")
• 15:31, 8 June 2025 Philipp talk contribs created page OpenOCD (Created page with "== <big>Barracuda module debug over JTAG using OpenOCD</big> == It was tested on Ubuntu 10.04 LTS and reciva-kernel-v24080215+00.tar.bz2 kernel pack. ===OpenOCD installation and testing === To install openocd in Ubuntu enter command sudo apt-get install openocd Create openocd config file ''JTAGdebug.cfg'' with this contents: # # Parallel port wiggler (many clones available) on port 0xc8b8 # telnet_port 4444 gdb_port 3333 interface parport parport_port 0...")
• 15:09, 8 June 2025 Philipp talk contribs created page MediaWiki:Sidebar (Created page with " * navigation ** mainpage|mainpage-description ** Introduction|Introduction ** recentchanges-url|recentchanges ** randompage-url|randompage ** helppage|help-mediawiki * SEARCH * TOOLBOX * LANGUAGES")
• 15:00, 8 June 2025 Philipp talk contribs created page Whistlist (Redirected page to Wishlist) Tag: New redirect
• 15:00, 8 June 2025 Philipp talk contribs created page Magicbox (Redirected page to IMP Magicbox) Tag: New redirect
• 14:59, 8 June 2025 Philipp talk contribs created page IMP (Redirected page to IMP Magicbox) Tag: New redirect
• 14:58, 8 June 2025 Philipp talk contribs created page AE (Redirected page to AE Wifi Radio) Tag: New redirect
• 14:53, 8 June 2025 Philipp talk contribs created page File:IR100 with USB-hub.jpg
• 14:53, 8 June 2025 Philipp talk contribs uploaded File:IR100 with USB-hub.jpg
• 14:36, 8 June 2025 Philipp talk contribs created page Wishlist (Created page with "= Alternative firmware wishlist = The following list shows some features which would be possible to implement with the new firmware. This list is not complete, neither definitive, feel free to add your own ideas. * Show the time of day while playing audio * Running the radio without depending on the Reciva databases * Support for additional audio codecs (ogg, flac, aacp etc) and network protocols * New Feature : play stations that use flash embedded players * Bett...")
• 14:36, 8 June 2025 Philipp talk contribs created page Watchdog (Created page with "== Overview == The Libreciva dog function provides control of the processor's watchdog timer. In order to use the library function, you must include the header file: <syntaxhighlight> #include "dog.h" </syntaxhighlight> === int dog_init() and void dog_exit() === These functions are used to initialise and shut down the watchdog system. dog_init() returns true on success, or false if there was an error accessing the hardware. Note that dog_exit() simply leaves...")
• 14:35, 8 June 2025 Philipp talk contribs created page Up-To-Date (Created page with "== Let's Get Talking == We have also created an interactive mailing list which you can use to communicate with fellow Reciva internals enthusiasts on [http://groups.google.co.uk/group/sharpfin sharpfin on Google Groups]. We encourage you to share discoveries and problems, code and patches, however .... We still encourage (and need) you to carry on editing, updating and maintaining this website, as it is the definitive resource for the project.")
• 14:33, 8 June 2025 Philipp talk contribs created page File:Wiggler2.png
• 14:33, 8 June 2025 Philipp talk contribs uploaded File:Wiggler2.png
• 14:33, 8 June 2025 Philipp talk contribs created page File:SharpflashPinBoardOn.jpg
• 14:33, 8 June 2025 Philipp talk contribs uploaded File:SharpflashPinBoardOn.jpg
• 14:33, 8 June 2025 Philipp talk contribs created page File:SharpflashPinBoardOff.jpg
• 14:33, 8 June 2025 Philipp talk contribs uploaded File:SharpflashPinBoardOff.jpg
• 14:32, 8 June 2025 Philipp talk contribs created page File:SharpflashWigglerBackside.jpg
• 14:32, 8 June 2025 Philipp talk contribs uploaded File:SharpflashWigglerBackside.jpg
• 14:32, 8 June 2025 Philipp talk contribs created page File:SharpflashCableExample.jpg
• 14:32, 8 June 2025 Philipp talk contribs uploaded File:SharpflashCableExample.jpg
• 14:29, 8 June 2025 Philipp talk contribs created page File:SharpfinWigglerExample.jpg
• 14:29, 8 June 2025 Philipp talk contribs uploaded File:SharpfinWigglerExample.jpg
• 14:28, 8 June 2025 Philipp talk contribs created page File:Wiggle.png
• 14:28, 8 June 2025 Philipp talk contribs uploaded File:Wiggle.png
• 14:28, 8 June 2025 Philipp talk contribs created page File:Jtag-soldering.jpg
• 14:28, 8 June 2025 Philipp talk contribs uploaded File:Jtag-soldering.jpg
• 14:27, 8 June 2025 Philipp talk contribs created page Unbricking (Created page with "== Introduction == If your radio bricked after you edited the config file, it is possible to unbrick it by removing the Barracuda module and placing it in a radio that has a different hardware-id e.g. a module from an Intempo (761), inside a Logik IR100 (1012). Once powered up, you can login and restore the config file edits (since the new radio boots using the config files for its radio hardware-id, not the one you messed up). The following procedure will take you th...")
• 14:27, 8 June 2025 Philipp talk contribs created page Toolchain (Created page with "== Cheat == If you want to cheat, and want to do your development under Cygwin, you can download a pre-compiled cross-compiler toolchain for the Cygwin environment on the Releases page. == Download Crosstool == Crosstool is a collection of scripts which can help you building a cross compiler toolchain without pain. Get the latest version from [http://kegel.com/crosstool/] == Build the toolchain == Reciva uses two different toolchains to build the radio software....")
• 14:26, 8 June 2025 Philipp talk contribs created page The Universal Remote (Created page with "dummy")
• 14:26, 8 June 2025 Philipp talk contribs created page Tevion (Created page with "== Inside the Tevion 5404 == === Introduction === The Tevion 5404 appears to be three separate functions combined into a single equipment. These functions are: * Internet Radio (Using the Reciva Barracuda Module) * FM Radio * Alarm You use the power button to toggle between the Internet Radio (IR) and the FM Radio functions. Holding in the power button switches the unit off. You hold down the select button to access the Trebble / Bass / Alarm / Clock / press Reset...")
• 14:25, 8 June 2025 Philipp talk contribs created page Source Files (Created page with "== Source Files == This page contains the source files, which are used to generate the images and pictures on the Sharpfin Project.")
• 14:24, 8 June 2025 Philipp talk contribs created page Software (Created page with "This page only discusses the non-proprietary software running on the Barracuda module. We do *not* discuss or reverse engineer the 'Reciva Radio Application'. If you think you can help build this public information resource, please [http://sharpfin.zevv.nl/index.php?title=Special:Userlogin&returnto=Main_Page create an account]and get involved. = Using JTAG To Install an SSH Shell = The project purpose is to provide an alternative open source solution to the Reciva pro...")
• 14:23, 8 June 2025 Philipp talk contribs created page Software SSH Shell Activation (Created page with "== Enabling Login == '''REMINDER: The purpose of the project is to provide alternative firmware / patches to the reciva offering. The Sharpfin Project does not condone, and will not be party to any reverse engineering activities of any reciva application, the project deals with GPL code only.''' The NAND Flash in the reciva radio is partitioned into 5 areas: <pre> dev: size erasesize name mtd0: 00004000 00004000 "NAND BootAgent" mtd1: 000fc000 00004000 "Linux K...")
• 14:23, 8 June 2025 Philipp talk contribs created page Sleep timer.txt (Created page with "When I first base patched my LOGIK IR100's there were values in the config files for the sleep timer. After upgrading to the v 257-a-421-a-057 service pack, the original unlimited sleep timer is now limited to three hours, and I can find no reference to it in the config file. Any help to increase the sleep timer would be appreciated.")
• 14:22, 8 June 2025 Philipp talk contribs created page Single Phase And Three Phase (Created page with "dummy")
• 14:21, 8 June 2025 Philipp talk contribs created page Sharpflash Bugs (Created page with "= Bugs = Please leave details of bugs and bug-fixes on this page, or chat about them on the discussion tab ... == Partition Overrun == Version: 0.1 Suspected Bug: If there are bad blocks, writing will overrun, and possibly corrupt next partition. Temporary fix: run sharpflash -b and reduce length in sharpflash -w command by 0x4000 * number of known bad blocks in partition. Permanent Fix: Truncate (lose) any blocks which overrun the specified length in the -w comman...")
• 14:19, 8 June 2025 Philipp talk contribs created page SharpfinPatchfileStore (Created page with "The following files on the Sharpfin server are downloadable through the patchserver-launcher.exe programme. * Image:Sharpfin-uninstall 0.1.patch - https://www.sharpfin.org/images/7/71/Sharpfin-uninstall_0.1.patch * Image:Sharpfin-test.patch - https://www.sharpfin.org/images/9/9a/Sharpfin-test.patch * Image:Sharpfin-base 0.3.patch - https://www.sharpfin.org/images/c/c2/Sharpfin-base_0.3.patch * Image:Sharpfin-www 0.6.install - https://www.sharpfin.org/ima...")
• 14:16, 8 June 2025 Philipp talk contribs created page Sharpfin Packages History (Created page with "= Patchfiles = Patchfiles contain one or more packages. == sharpfin-base.patch == * '''12 January 2008: [http://www.sharpfin.zevv.nl/images/e/ee/Sharpfin-base_0.3.zip 0.3]:''' sharpfin-base_0.1, sharpfin-httpd_0.1, sharpfin_telnetd_0.1, sharpfin-www_0.6 * '''2 November 2007: [http://www.sharpfin.zevv.nl/images/c/c3/Sharpfin-base_0.2.zip 0.2]:''' sharpfin-base_0.1, sharpfin-httpd_0.1, sharpfin_telnetd_0.1, sharpfin-www_0.5 * '''29 September 2007: 0.1:''' sharpfin-base_...")
• 14:15, 8 June 2025 Philipp talk contribs created page Sharpfin Enhance Pack (Created page with "The Sharpfin Enhance Pack is an addon to the Sharpfin project, which adds some new features to the webinterface from your radio. Currently, 2.0 s the newest version from the enhance pack and you can install it easily over your sharpfinned radio like this: * Open the webinterface from your radio * Go to "Admin Home" and select "Install Addon" * Enter the following URL: "http://www.gforums.de/daten/sharpfin-ep2.install" * Click on install and watch your radios display *...")
• 14:15, 8 June 2025 Philipp talk contribs created page Sample Project (Created page with "== First of all: == '''Exploration of your radio this way will void the warranty'''. Neither do it (i. e. the hardware modification), if you are an electronics newbie or don't have the appropriate tools and skills. An internet radio (or some other 'high density' printed circuit board) ain't the battlefield for soldering irons like flame throwers - with respect to the small component sizes and narrow contact spacings - nor a dedicated object for the art of poker work....")
• 14:14, 8 June 2025 Philipp talk contribs created page Sample Project to edit 2 (Created page with "dummy")
• 14:13, 8 June 2025 Philipp talk contribs created page Sample Projects (Created page with "To be filled soon...")
• 14:12, 8 June 2025 Philipp talk contribs created page File:Sharpfin-screen.jpg
• 14:12, 8 June 2025 Philipp talk contribs uploaded File:Sharpfin-screen.jpg
• 14:11, 8 June 2025 Philipp talk contribs created page File:Sharpfin roadmap.png