Hardware

Radio's

The Barracuda is used in the the following radios:

• AE Wifi Radio
• Bush TR2015WIFI
• IMP Magicbox
• IMP Adaptor
• IR100
• Scitec IR-001W

Barracuda hardware

The Barracuda module is a pretty straightforward, but very compact, board with CPU, flash, ram and some interfaceing for audio, buttons and LCD display

Front of the PCB	Back of the PCB
Board outline with numbered pins	Connector pinout, under construction	Composite image showing top and bottom layers

The Processor board is marked 'Reciva' and 'IRM2' in the silk screen, and contains (mainly) three devices, all manufactured by Samsung.

The right image shows a board outline with pin numbers on the pads. These numbers are by no means official, but until we know the exact purpose of the pins, it's handy to give them a number so everybody is talking about the same thing.

Main CPU

• The central one is the main processor, Samsung S3C241 for which a complete datasheet is available

The CPU has the following on-board functions:

• ARM core
• PCM Sound device
• USB host/device interface
• TFT LCD/STN LCD Controller (16bit, 640x480 maximum)
• ...

Smally Tiny12 CPU

There's also an Atmel Tiny12L MCU onboard. No idea what it's doing yet.

Flash

• The top left device is a K9F2808U0C: 16Mb*8 flash memory

RAM

• the bottom left device is SDRAM 16M*16 (K4S561632E-TC75)

Schematic

This schematic (work in progress) is an amalgumation of information extracted from several disassembled radios, plus information extracted from the GPL'd source.