AE Wifi Radio: Difference between revisions

From Sharpfin
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
== Crackling noise ==
= Opening the AE =


(Not part of the sharpfin project, but documented here because a lot of people experience this problem)
This page describes how to open the AE radio. Most is easy, but take care when removing or connecting the flatcable, this is a fragile part of the radio's guts.


The AE radio has a nasty hardware 'bug' causing a crackling noise in the sound, caused by the wifi module inside the radio. Some unit have a louder crackle then others, but all AE radios I tried were noise to some extend.
<center><b>OPENING YOUR RADIO IS AT YOUR OWN RISK!!</b></center>
If your radio is crackling, you could try the following procedure.
 
* Open the radio as descriebed above
* Unplug the radio wires from the brown connector on the PCB.
* Twist the wires 5 or 6 times
* Plug back in
* When closing the unit, try to push the speaker wires as far away from the USB wifi module as possible
* Close the radio
 
This might, or might not, solve your problem, but it did for me on 3 different AE radios.
 
==Replacing the WLAN module==
If your radio get's stuck in a endless loop of initialising the network or generally seems to loose connection to your WLAN quite often, even if the radio reception is good, this might be caused by some neighbouring 802.11n router affecting the built-in WLAN module.
 
Here is an article on [[Replacing the internal WLAN module]], which fixes this problem.

Revision as of 13:43, 28 May 2021

Opening the AE

This page describes how to open the AE radio. Most is easy, but take care when removing or connecting the flatcable, this is a fragile part of the radio's guts.

OPENING YOUR RADIO IS AT YOUR OWN RISK!!