Philipp: Created page with "== List of Radios == * See content above. == General Info == In this section you find ADDITIONAL configurations from other users which they have used on their radio. You can add your configuration file here, but make sure: * to enter the right name and radio id * to double check the config options * to add some comments To add a configuration easily to your radio, you can do the following using (copy and paste): * telnet your radio and remount the partition writable..."

2025-06-08T09:42:35Z

Created page with "== List of Radios == * See content above. == General Info == In this section you find ADDITIONAL configurations from other users which they have used on their radio. You can add your configuration file here, but make sure: * to enter the right name and radio id * to double check the config options * to add some comments To add a configuration easily to your radio, you can do the following using (copy and paste): * telnet your radio and remount the partition writable..."

New page

== List of Radios ==

* See content above.

== General Info ==

In this section you find ADDITIONAL configurations from other users which they have used on their radio.
You can add your configuration file here, but make sure:
* to enter the right name and radio id
* to double check the config options
* to add some comments

To add a configuration easily to your radio, you can do the following using (copy and paste):
* telnet your radio and remount the partition writable ("mount / -orw,remount")
* cd hwconfig
* backup your config file: "cp configXXX.txt configXXX_backup.txt" where XXX is your radio ID
* open your file with "vi configXXX.txt"
* move the cursor one line behind last Option-entry in the file and press "a" to start the insert-mode in vi.
* mark the config-file text from here and right-click the cursor in the telnet app "putty.exe". This should insert the whole marked text
* double check if the text was inserted properly, especially check the beginning and end, if there is no letter missing
* BE SURE THAT YOU PROCEED AT YOUR OWN RISK !!!
* press "escape" to leave the insert-mode
* press ":w" to save the changes
* press ":q" to quit the editor
* unpower your radio, power it again and hope that it turns on and you did all right.

ONLY DO THIS AT YOUR OWN RISK !!!

== dnt ipdio style (Radio ID: 752) ==

Option:
contrast-menu
on

Option:
back-as-menu-item
on

Option:
off-in-main-menu
on

Option:
pbch-report-enabled
off

Option:
long-select-action
popup

Option:
usb-thumbdrive
on

Option:
thumbdrive-power-connector
2

Option:
thumbdrive-power-pin
30

Option:
local-media
on

Option:
reply-button-function
on

Option:
bookmarks
on

Option:
bookmark-on-long-select
on

Option:
preset-confirmation-popup
on

Option:
graphical-clock
off

Option:
clock-screen-format
banner/clock/date

Option:
clock-format-menu
on

Option:
bitmap-clock
64x64 /usr/share/reciva/clockdata.bin

Option:
split-alarm-icons
on

Option:
aux-menu
on

Option:
volume-control
on

Option:
initial-volume
28

Option:
reply-button-exits-spinner
on

Comments: 
With those options you add the following things to your radio: 
* A working equalizer menu
* A working contrast menu. This is important as the standard contrast is set to high and causes problems! Set it to 10.
* When doing a substring search, prssing "reply" does the same and srolling to "END"
* You get rid of the "REAL ENABLED" string
* You get a 3-line-standby display instead of the big clock. Setting "graphical-clock" to "on", you have a analogue clock displayed
* Every of the five alarms has its own icon
* "back" and "off" are now also menu items
* the local-media option is active, so when you unscrew your radio and insert a usb hub with usb data stick, you can listen to mp3s on it
* reply button saves the current station to the "MyStreams"-Database
* you have local bookmarks in addition the the "MyStreams" favorites.

Tested on dnt ipdio with firmware 756-a-122. 
By: gforums.

== Logik IR100 (Radio ID: 1012) ==

NOTE 1: This is a FULL config file for replacement. Delete all option-entrys from the old config-files and then insert this.
You can delete a line in "vi" pressing twice the "d"-key. Do that until all option-entrys (and not more than these!!) are removed.
Note 2: Using the firmware 257-a-756-a-205 with these settings. Older firmwares should do it as well.

include all_radios.txt

Option:
stereo-mode-menu
on

Option:
stereo-mode
stereo

Option:
backlight-level-standby
2

Option:
backlight-level-inactive
4

Option:
upnp
on

Option:
media-player
on

# ---------------------------------
# Please note: on newer firmwares,
# use the initial-volume-mb setting
# (try which works better, I use it
# with the 257-a-756-a-205 fw)
# on older firmwares, use the old
# initial-volume setting.
# ---------------------------------

Option:
initial-volume-mb
0

# Option
# initial-volume
# 28

Option:
volume-control
off

Option:
user-interface
multi-line

Option:
alarm-clock
config1

Option:
stations-history
on

Option:
history-size
20

Option:
stations-substring-search
on

Option:
sleep-timer-increment
300

Option:
clock-dst-menu
on

Option:
number-of-alarms
5

Option:
back-as-menu-item
on

Option:
presets-as-menu-items
on

Option:
off-in-main-menu
on

Option:
force-metadata
on

Option:
reset-clock
on

Option:
usb-thumbdrive
on

Option:
thumbdrive-power-connector
2

Option:
thumbdrive-power-pin
30

Option:
local-media
on

Option:
reply-button-exits-spinner
on

Option:
pbch-report-enabled
off

Comments: 
With those options you add the following things to your radio: 
* A very very useful search function. When you once have it activated, you won't miss it anylonger.
* When doing a substring search, prssing "reply" does the same and srolling to "END"
* You get rid of the "REAL ENABLED" string
* "back" and "off" are now also menu items
* the local-media option is active, so when you unscrew your radio and insert a usb hub with usb data stick, you can listen to mp3s on it
* reply button saves the current station to the "MyStreams"-Database (#1)
* you have local bookmarks in addition the the "MyStreams" favorites.
* Radio saves a history of the last played stations
* Take care of the setting "initial-volume". Reciva seems to have changed the volume handling with newer firmwares. With the wrong setting, the radio will be not as loud as with the right setting.
* #1 NOTE: in some firmware configuration, you have to edit the file "all_radios_common.txt". Here the option "reply-button-function" is set to off. You need to change that to "on".

Tested on LOGIK IR100 with firmware 756-a-205. 
By: gforums.

== Intempo GX-01 (Radio ID: 761 & 985) ==
The settings need to be added to config761.txt (config985.txt for older Intempos) - do not simply replace the file.

# make mute work
Option:
aud-soft-mute-in-adrvg
on

# stops nasty clicking between tracks
Option:
dynamic-mute
off

# add search to Stations menu
Option:
stations-substring-search
on

# better alarm options - not just the default buzzer
Option:
alarm-clock
config1

# 12/24 hour selection
Option:
clock-format-menu
on

Option:
number-of-alarms
5

# put alarm clock in main menu
Option:
clock-in-config-menu
off

# remove REAL ENABLED - not needed in later firmwares
Option:
pbch-report-enabled
off

# really useful
Option:
long-browse-press-clears-media-queue
on

# remove one track from queue - really useful
Option:
long-stop-deletes-track
on

# this menu is not needed now we can set the default dem value.
# earlier firmwares do not save the dem value and you need to set it to 0 with this menu after each reboot.
#Option:
#deemphasis-menu
#on

#Option:
#deemphasis-menu-values
#0 44100

Option:
reply-button-function
on

Option:
presets-as-menu-items
on

# add My History to My Stuff menu
Option:
stations-history
on

Option:
history-size
50

# 5 min increments to sleep timer
Option:
sleep-timer-increment
300

# add option to resync clock in clock menuu
Option:
reset-clock
on

# useful to tell that you're at the bottom of a menu.
Option:
back-as-menu-item
on

# so I don't suddenly lose my place looking for stuff
Option:
select-returns-to-top
off

# add Bookmarks menu to Stations menu
Option:
bookmarks
on

# add the current station to the bookmarks
Option:
bookmark-on-long-select
on

Option:
preset-confirmation-popup
on

Option:
report-empty-presets
on

# show the clock whilst playing
Option:
clock-in-status-line
on

# limit to 4 icons (so they don't overwrite the clock)
Option:
lcd-icon-slots
4

# put the clock at horizontal middle (pixels)
Option:
status-line-clock-position
58

# give us back some treble - marvelous
Option:
deemphasis-frequency
0

# find network when powered up and then go to standby
Option:
acpoweron-state
network

# extra (continent) level of menus in Stations->Location
Option:
hierarchical-locations
on

# countdown sleep mins on track detail line - works
#Option:
#display-sleep-countdown
#on

# gradually reduce the volume in the last min before sleeping
Option:
sleep-timer-ramp-down
on

# make sleep timer easier to find when tired
Option:
sleep-timer-in-main-menu
on

# clock flashes 00:00 when unset
Option:
status-line-clock-flashes
on

# faster horizontal text scrolling speed
Option:
scroll-timeout-unzoom
160000

Option:
scroll-timeout-zoom
160000

# delay before starting horiz text scroll
# multiply this by scroll-timeout for the actual delay
Option:
scroll-delay
3

# show padlocks next to secured wifi
Option:
network-list-includes-wep-state
on

Option:
wifi-sort-by-quality
on

# add wireless-standby/stay-connected option to network config menu (choose to disconnect wifi in standby)
Option:
wifi-standby-power-menu
on

Option:
upnp-vendor-name
Intempo

Option:
upnp-model-name
GX01

Option:
snooze-key
BACK

Option:
snooze-duration
9

Comments: 
* Setting deemphasis off vastly improves the sound quality.
* The clock is enabled in the status line. The clock would not appear with 257-a-756-a-030 firmware but works on 257-a-756-a-238 and later.
* For scroll-timeout-* values, use a value which doesn't divide nicely into a second, otherwise there'll be a stutter when the track time updates. Increasing the horizontal scroll speed like this really improves usability. Anyone know how to speed up vertical scrolling (and the delay before it starts)?
* The clock position - If you choose to only have 24hr option, 46 will centre it. This value needs changing for 12hr. 58 is OK for both 12/24hr to work. This requires the icons spaces to be set to 4, to limit the number of icons.
* Mute now works both through speaker and line out.
* If the wifi standby is set to disconnected, it's unlear if any power is saved (the wifi led still flashes). Update - you need to add Option: wireless-ethernet-connector 2 Option: wireless-ethernet-pin 32 to actually power the wifi down. (GSUM)
By: Hovis

== Ministry of Sound MOSAC150 (Radio ID: 1007) ==

Insert options into the existing hwconfig/config1007.txt. Put these after the current options, and they will override some of them.

# Vertical menus (I prefer this to single line browsing)
Option:
user-interface
multi-line

# 11steps14dB increases steps of bass and treble (this allows more bass but less treble (1400 rather than 1800))
# The default for this setting is cf1007 which sounds good and allows max treble (1800).
# There's also '11steps' which is -1000 to +1000 for bass and treble, which is quite limiting.
# conclusion - best to use the default cf1007!
#Option:
#bastreb-curve
#11steps14dB

Option:
alarm-choice-dialogues
on

Option:
number-of-alarms
5

# faster horizontal text scrolling speed
Option:
scroll-timeout-unzoom
160000

Option:
scroll-timeout-zoom
160000

# delay before starting horiz text scroll
# multiply this by scroll-timeout for the actual delay
Option:
scroll-delay
4

Option:
adjustable-backlight
on

# reply button allows add/remove of current station in your Reciva list
Option:
reply-button-function
on

# add search to Stations menu
Option:
stations-substring-search
on

# better alarm options - not just the default buzzer
Option:
alarm-clock
config1

# 12/24 hour selection
Option:
clock-format-menu
on

Option:
preset-confirmation-popup
on

Option:
report-empty-presets
on

# add Bookmarks menu to Stations menu
Option:
bookmarks
on

# add the current station to the bookmarks
Option:
bookmark-on-long-select
on

# add My History to My Stuff menu
Option:
stations-history
on

Option:
history-size
20

# really useful
Option:
long-browse-press-clears-media-queue
on

# remove one track from queue - really useful
Option:
long-stop-deletes-track
on

# 5 min increments to sleep timer
Option:
sleep-timer-increment
300

Option:
wifi-sort-by-quality
on

# find network when powered up and then go to standby
Option:
acpoweron-state
network

# show metadata for stations that transmit it
Option:
force-metadata
on

# instead of MOS Radio/Time in standby
Option:
clock-screen-format
clock/date

Comments: 
* Menus are now vertical, two line - personal preference.
* there are 5 alarms and each can be weekly, weekdays only, etc. They can also be buzzer or a radio preset. The alarm button on the remote now takes you to the Clock-Setup menu rather than straight to the previous single basic alarm.
* faster horizontal scrolling text. The default of 1 second was way too slow.
* history and bookmarks
* The backlight is now adjustable for Active, Inactive, Standby (Configure menu). Never set Active to zero 8-).
* To watch the effect of changing bastreb-curve, watch config/audio.ini as you change the Eq. The values relate to the AD8356A Eq spec e.g. 1800 = +18db treble

By: Hovis

Comment by brassing: 

* If you include

Option:
pbch-report-enabled
off

to suppress REAL ENABLED then it does work (i.e REAL ENABLED is suppressed) but a side effect is that the scroll-delay option has no effect. In this case the scroll delay seems fixed at about 1.
[Reciva Radio App Version v589-a-950-a-236
Reciva Service Pack No. 257-a-756-a-212
Reciva Kernel Package Version. v24080902+00]

== Bush (Radio ID: 1006) ==
This is all my configure files options. 
It adds USB local files to be played (you need to connect a USB hub inside the radio). 
Adjust clock to local timezone. 
Use username/password for files on local network when scan for files (Radio reboot when to many files on local network or USB stick). 
Add Equalisation in menu, but ajustment is not working. 

Option:
shift-behaviour
5presets

Option:
stereo-mode
stereo

Option:
stereo-mode-menu
off

Option:
upnp
off

# Enabel USB sticks ***start***
Option:
usb-thumbdrive
on

Option:
thumbdrive-power-connector
2
Option:
thumbdrive-power-pin
30

Option:
local-media
on
# Enabel USB sticks ***finish***

Option:
force-metadata
on

Option:
reply-button-function
on

# adds the menu option Equalisation under Configure, but
# not able to change value with wheel. Stays on 0 bothe bass and treble.
# light i Volume LED is on
Option:
aux-menu
on

Option:
media-player
on

Option:
scroll-timeout-unzoom
1000000

Option:
scroll-timeout-zoom
1000000

Option:
contrast-level
38

Option:
contrast-config
bush-recess

Option:
backlight-min
0

Option:
backlight-max:
8

Option:
backlight-multiplier:
4

Option:
select-returns-to-top
off

Option:
adjustable-backlight
off

Option:
backlight-level-normal
31

Option:
backlight-level-inactive
31

Option:
backlight-level-standby
1

Option:
dst-policy
ec9

# Set local time zone
# 10800 = 3 hours
Option:
default-user-timezone
10800

Option:
standby-text
My Radio

Option:
wifi-region
europe

# Radio will ask for username/password when
# accessen local network to scan for files
Option:
advanced-file-sharing
on

Option:
dynamic-mute
on

Option:
back-as-menu-item
on

Option:
presets-as-menu-items
on

# This enables an equalizer menu accessed with a long press of the Select button
Option:
long-select-action
popup

Option:
pbch-report-enabled
off

# show time/date as:
# 23:45
# 12 june 2009
# when radio is off
Option:
clock-screen-format
clock/date

By k2teknik

== Magicbox Imp / Acoustic Energy (Radio ID: 1019) ==

Insert options into the existing hwconfig/config1019.txt (just before the include keypad_alto.txt line) - do not simply replace the file.

The lcd-display-mode option should work on other radios with a graphic LCD display, it gives three lines of text rather than the standard two on the Imp, this makes it easier to navigate the menus.

#This can alsp be set on the reciva website; show mp3 track names
Option:
force-metadata
on

#Add a clock to the bottom of the screen
Option:
clock-in-status-line
on

#Set the horizontal position of the clock
Option:
status-line-clock-position
50

#Don't remember what this did, I've not used the alarm function
#Option:
#split-alarm-icons
#on

Option:
user-interface
multi-line

#The following options are forced in my AE Radio by the config override
#(DSCO_ConfigOverride.txt) but not in the Magicbox Imp:

#Set three lines of text and space for clock on display,
#this isn't standard on the imp and makes things look
#a lot better.
#Should work on other radios with a graphic LCD
Option:
lcd-display-mode
2

Option:
reply-button-function
on

Option:
clock-in-config-menu
off

Option:
clock-24-hour
off

Option:
clock-format-menu
on

Option:
number-of-alarms
4

#Go to standby if power switched off/on while running
Option:
acpoweron-state
network

More information on [[Config Override]].

Working with v257-a-865-a-476

== Go back ==

Return to the Config.txt_File [[Config.txt_File]] website.

Config example files - Revision history